Plug Tap M4 HSS Pitch 0.7mm

This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....

£5.45
Buy
 

 

Related Products

Top Hung Roof Window

Top Hung Roof Window
£249.00

Outward opening window does not encroach on valuable living spaceLow E double glazing with toughened outer pane for improved thermal efficiency, with a U Value of just 1.4W/m2KConstructed from prime multi laminated quality pine for increased strength and everlasting aesthetics. The pine is hand sanded for a craftsman finish and lacquered with multiple coats to achieve a stain resistant surface.Lowest profile of any standard roof window in the market provides a streamlined appearance with your roofMaintenance free hinge, no need to lubricateTrickle system with insect filter ensures only clean fresh air ventilation even when window is locked and secureReversible 180 degrees window enables outer surface to be cleaned from inside the roomCan be installed in any sloping roof with a pitch between 15 and 75 degreesChoice of flashing and blinds also available

Contrio Blackout Roof Window Blind Multifit DURM4A4212 Dark Blue (H)980mm x (W)780mm

Contrio Blackout Roof Window Blind Multifit DURM4A4212 Dark Blue (H)980mm x (W)780mm
£69.98

Easy to choose: fits perfectly with VELUX ®, Fakro ®, Rooflite ®, B&Q ® windows, Easy to install: 3 steps, 10 minutes, with a simple screwdriver, no cutting required, Hardwearing, dirt resistant combination of polyester and lightproof rubber fabric. High quality aluminium tracking, Check the roof window identification plate to verify compatibility, Compatible with Velux GGL-GGU- GHL type 1, 304 or M04 / RoofLITE & B&Q type M4A / Fakro type 5, Choose from our range of Flashings to accompany your roof window.

Black Iron Blind Hook1.3/8in 4206

Black Iron Blind Hook1.3/8in 4206
£4.12

Black iron blind hook to fit on the end of a pole. Outside diameter measures 1.3/8in (35mm), overall length 87mm. The socket has an internal diameter of approximately 28mm. A pole will need to be purchased separately to fit this product.

 
 
 

 
 
 

Comments are closed.

Set your Twitter account name in your settings to use the TwitterBar Section.