iDecorating
Coving
Tungsten Carbide Router Bit Set 15 in Case 1/2in Shank
£26.46
Tungsten Carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used.Router Bit sets with different cutter shapes which enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood.A boxed set of 15 Router Bits.Shank: 12.7mm (1/2in)Contents: One of each Dia. DepthStraight Cutter 3.2 mm 14 mmStraight Cutter 6.5 mm 20 mmStraight Cutter 12.7 mm 25 mmStraight Cutter 19.0 mm 20 mmDovetail Cutter 12.7 mm 8 mmPanel Pilot 6.5 mm 30 mmGuided Flush Trimmer 12.7 mm 12 mmMortising Cutter 12.7 mm 13 mmCore Box R3.2mm 7.0 mm 6 mm90 deg V Cutter 12.7 mm 10 mm45 deg Guided Chamfer 30.0 mm 14 mmGuided Cove 9.5 mm 30.0 mm 14 mmGuided Rabbeting Cutter 30.0 mm 10 mmGuided Roman ogee 25.0 mm 12 mmGuided Rounding R10mm 32.0 mm 16 mm
Trend Single Flute Cove 3.0mm Rad x 15mm (Tct Router Cutter Range / Radius)
£26.32
For coves and part of a rule joint. Solid Carbide insertSingle flute.Dimensions:Diameter: 6mmCutting Length: 15mmCutting Radius: 3mmShank Diameter: 8mmPlease note that prices in the Trend Catalogue download, if...
Trend Radius Cutter 3.2mm Rad x 11mm Cut (Tct Router Cutter Range / Radius)
£26.32
For coves and part of a rule joint. Solid Carbide insert.Dimensions:Diameter: 6.4 mmCutting Length: 7/16 inchCutting Length: 12.7 mmCutting Radius: 3.2 mmShank Diameter: 1/4 inchPlease note that prices in the T...
Trend Radius Cutter 3mm Rad 257090 (Tct Router Cutter Range / Radius)
£26.32
For coves and part of a rule joint. Single flute.Dimensions:Diameter: 6mmCutting Length: 15mmCutting Radius: 3mmShank Diameter: 1/4 inchPlease note that prices in the Trend Catalogue download, if shown below, may d...
Trend B/Guided Flat Sunk Bead R8mm (Tct Router Cutter Range / Guided Sunk Bead)
£26.32
For creating a concave radius or cove in the edge of furniture and columns.Dimensions:Diameter: 19.1mmCutting Length: 12.7mmBearing Diameter: 12.7 mmCutting Radius: 8mmShank Diameter: 1/2 inchPlease note that price...
Trend B/Guided Flat Sunk Bead R5mm (Tct Router Cutter Range / Guided Sunk Bead)
£25.19
For creating a concave radius or cove in the edge of furniture and columns.Dimensions:Diameter: 19.1mmCutting Length: 9.5mmBearing Diameter: 12.7 mmCutting Radius: 5mmShank Diameter: 1/2 inchPlease note that prices...
Artex Simply Classic Paper Faced Cove (L)200cm x (D)12.7cm 6 pack
£24.98
Available in 2m lengths for easy handling and fitting
Trend Radius Cutter 2.4mm Rad x 11mm Cut (Tct Router Cutter Range / Radius)
£24.68
For coves and part of a rule joint. Solid Carbide insert.Dimensions:Diameter: 4.8mmCutting Length: 7/16 inchCutting Length: 11mmCutting Radius: 2.4mmShank Diameter: 1/4 inchPlease note that prices in the Trend ...
Duropolymer Cove
£24.50
Durable and lightweightAlready primed ready to paintSharp details-clear design featuresEasy to installHumid resistantRibbed on reverse for easy adhesion
Plaster Coving
£24.49
Easy to fixWell defined edge featuresCovers up cracksPaper faced for easy decoration and professional finish
Trend Cove radius 6.35mm x 7.9mm cut
£23.72
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig.
Trend Radius 6.3mm radius x 12.7mm diameter
£23.72
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig.
Trend Radius 12.7mm Rad x 25.4mm Dia (Tct Router Cutter Range / Radius)
£23.56
This cove style cutter with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.Dimensions:Diameter=1 inchDiameter=25.4 mmCutting Length: 5/8 inchCutti...
Trend Radius 12.7mm Rad x 25.4mm Dia (Tct Router Cutter Range / Radius)
£23.56
This cove style cutter with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.Dimensions:Diameter: 25.4mmCutting Length: 15.9mmCutting Radius: 12.7mm...
Trend Radius 12.7mm Rad x 25.4mm Dia (Tct Router Cutter Range / Radius)
£23.56
This cove style cutter with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.Dimensions:Diameter: 1 inchDiameter: 25.4mmCutting Length: 5/8 inchCutt...
Trend Radius Cutter 1.6mm Rad (Tct Router Cutter Range / Radius)
£23.05
For coves and part of a rule joint. Solid Carbide insert.Dimensions:Diameter: 1/8 inchDiameter: 3.2 mmCutting Length: 3/8 inchCutting Length: 9.5 mmShank Diameter: 1/4 inchPlease note that prices in the Trend C...
