iDecorating
Coving
Trend Cove 25.4mm Rad x 50.8mm Dia (Tct Router Cutter Range / Radius)
£91.60
For coves and part of a rule joint. Two flute.For stationary machines - 18000 RPM recommended speed.Dimensions:Diameter: 50.8mmCutting Length: 1 1/4inchCutting Length: 31.7mmCutting Radius: 25.4mmShank Diameter: 12...
Trend Cove 25.4mm Rad x 50.8mm Dia (Tct Router Cutter Range / Radius)
£91.60
For coves and part of a rule joint. Two flute.For stationary machines - 18000 RPM recommended speed.Dimensions:Diameter: 50.8mmCutting Length: 31.7mmCutting Radius: 25.4mmShank Diameter: 1/2 inchPlease note tha...
Trend B/Guided Decor 5.5mm R1 x 6mm R2 (Tct Router Cutter Range / Edge Moulders)
£91.09
Cove & staff bead combined for rails, frames & edging.Dimensions:Diameter: 40mmDiameter: 28mmCutting Length: 30mmBearing Diameter: 16mmCutting Radius 1: 5.5mm Cutting Radius 2: 6mmShank Diameter: 1/2 inchPl...
Trend Cove 19.1mm Rad x 38.1mm Dia (Tct Router Cutter Range / Radius)
£85.17
For coves and part of a rule joint. Two flute.Dimensions:Diameter: 38.1mmCutting Length: 31.7mmCutting Radius: 19.1mmShank Diameter: 1/2 inchPlease note that prices in the Trend Catalogue download, if shown below, ...
Trend Bearing guided cove cutter 12.7mm radius
£80.41
The two bearings supplied offer the means of cutting different depths of mouldings.
Trend Bearing guided cove cutter 12.7mm radius
£80.41
The two bearings supplied offer the means of cutting different depths of mouldings.
Paslode 63mm x 2.8mm Ring Shank Galvanised Nails Pack of 3750 for IM90i
£76.95
Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on SpecificationMeet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and cove...
Sculptured Coving Pack of 6
£74.99
12m Pack (6 x 2m). Made from polyurethane. Extremely light and robust, with a density comparable to traditional timber but much easier to fit. The flexibility to follow contours of uneven walls and ease of trimming with a knife or fine saw, means a professional look with minimal filling and no splitting. No primer or undercoat is required and a classy finish is easily achieved with water-based emulsion and gloss paints. Ease of installation and superior finish means this product is worth the premium against either traditional wood or plaster products. Fix with No Nonsense Grab Adhesive Solvent-Free (Quote 87451). Features: Cuts Clean & Smooth; No Primer Required; Light & Easy to Handle; Mitres Clean & Crisp; Smooth Cross Section; 'Plaster' Finish.
Trend Guided panel cove 9.5mm radius
£74.85
Template thickness should be 5mm thicker than cut length of cutter.
Paslode 57mm x 2.8mm Ring Shank Galvanised Nails Pack of 3750 for IM90i
£72.95
Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on SpecificationMeet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and cove...
Paslode 90mm x 3.1mm Ring Shank Galvanised Nails Pack of 2500 for IM90i
£72.95
Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on SpecificationMeet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and cove...
Trend Two Flute Guided Cove 16.0mm Rad (Tct Router Cutter Range / Radius)
£71.81
The two bearings offer the means of cutting different depths of mouldings.Two bearings are supplied.Dimensions:Diameter: 41.3mmCutting Length: 18mmBearing Diameter: 9.5mm & 12.7mmCutting Radius: 16mmShank Diameter: 1/2...
Trend Cove & Edge Trim 8mm Rad (Tct Router Cutter Range / Radius)
£71.81
This time-saving cutter trims the edge & cuts a radius edge mould at the same time.Dimensions:Diameter: 32mmDiameter: 16mmCutting Length: 18mmCutting Radius: 8mmShank Diameter: 1/2 inchPlease note that prices in th...
Trend Cove Panel Raiser 14mm Rad (Tct Router Cutter Range / Panel Mould Raised)
£71.30
Raised panel cutter on 8mm shank. Suitable for use with Ref. PSC/3X8mmTC.For stationary machines or portable routers mounted in a table at 22000 RPM recommended speed.Dimensions:Diameter: 45mmDiameter: 17mmCutting Length: 14mm...
Paslode 51mm x 2.8mm Ring Shank Galvanised Nails Pack of 3750 for IM90i
£69.95
Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on SpecificationMeet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and cove...
