iDecorating
Coving
Trend Double guided sunk bead cutter
£69.32
For creating a concave radius or cove in the edge of furniture and columns.
Trend Bearing guided cove cutter 9.5mm radius
£68.55
The two bearings supplied offer the means of cutting different depths of mouldings.
Trend Bearing guided cove cutter 9.5mm radius
£68.55
The two bearings supplied offer the means of cutting different depths of mouldings.
Trend Bearing guided cove cutter 9.5mm radius
£68.55
The two bearings supplied offer the means of cutting different depths of mouldings.
Egg & Dart Coving Pack of 6
£67.99
12m Pack (6 x 2m). Light and robust polyurethane, with a density comparable to timber but much easier to fit. Flexibility and ease of trimming give a professional look with minimal filling and no splitting. No primer or undercoat required. Use water-based emulsion and gloss paints. Fix with No Nonsense Grab Adhesive Solvent-Free (Quote 87451). Features: Cuts Clean & Smooth; No Primer Required; Light & Easy to Handle; Mitres Clean & Crisp; Smooth Cross Section; 'Plaster' Finish.
Trend Octacut R12.7mm x 44.5mm Dia (Tct Router Cutter Range / Ovolo)
£67.01
The shank mounted bearing is used to accurately guide the set for cove mouldings.The three end mounted bearings are interchanged to vary the lower quirk on the ovolo moulds.Can be used portably or in a router table.Dimensions:"Dia...
Trend Two Flute Guided Cove 19.1mm Rad (Tct Router Cutter Range / Radius)
£67.01
The two bearings offer the means of cutting different depths of mouldings.Two bearings are supplied.For stationary machines - 18000 RPM recommended speed.Dimensions:Diameter: 50.8mmCutting Length: 25.4mmBearing Diameter: 1...
Trend Guided panel cove 9.5mm radius
£65.41
Template thickness should be 5mm thicker than cut length of cutter.
Trend Double guided sunk bead cutter
£65.41
For creating a concave radius or cove in the edge of furniture and columns.
Trend Radius 16mm Rad x 32mm Dia (Tct Router Cutter Range / Radius)
£64.87
For coves and part of a rule joint. Two flute.Dimensions:Diameter: 32mmCutting Length: 31.7mmCutting Radius: 16mmShank Diameter: 1/2 inchPlease note that prices in the Trend Catalogue download, if shown below, may ...
Trend Cove 11.1mm Rad x 22.2mm Dia (Tct Router Cutter Range / Radius)
£64.26
For coves and part of a rule joint. Two flute.Dimensions:Diameter: 22.2mmCutting Length: 31.7mmCutting Radius: 11.1mmShank Diameter: 1/2 inchPlease note that prices in the Trend Catalogue download, if shown below, ...
Tungsten Carbide Router Bit Set 35 in Case 1/2in Shank
£64.20
Tungsten Carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used.Router Bit sets with different cutter shapes which enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood.A boxed set of 35 Router Bits.Shank Diameter: 12.7mm (1/2in)Contents: 1 of each Dia Depth Straight Cutter 3.2 mm 14 mmStraight Cutter 6.5 mm 20 mmStraight Cutter 10 mm 25 mmStraight Cutter 12.7 mm 20 mmStraight Cutter 12.7 mm 25 mmStraight Cutter 19 mm 20 mmDovetail Cutter 12.7 mm 8 mmDovetail Cutter 15.0 mm 12 mmPanel Pilot 6.5 mm 30 mmGuided Flush Trimmer 10 mm 13 mmGuided Flush Trimmer 10 mm 25 mmGuided Flush Trimmer 12.7 mm 12 mmGuided Flush Trimmer 12.7 mm 25 mmGuided Flush Trimmer 19.1 mm 25 mmMortising Cutter 12.7 mm 13 mmCore Box R 3.2 mm 7 mm 6 mmCore Box R 6.3 mm 12.7 mm 8 mmCore Box R 6.3 mm 12.7 mm 20 mm90 deg V groove cutter 12.7 mm 10 mm45 deg Guided Chamfer 30 mm 14 mmGuided Cove R 6.35 mm 25 mm 10 mmGuided Cove R 9.5 mm 30 mm 14 mmGuided Rabbeting Cutter 30 mm 6.5 mmGuided Rabbeting Cutter 30 mm 8 mmGuided Rabbeting Cutter 30 mm 10 mmGuided Classical Cove 8mm 30 mm 15 mmGuided Wave Edge 30 mm 18 mmGuided Beading R 12.7mm 37 mm 20 mmGuided Double Roman 32 mm 14 mmGuided Double Roman 36 mm 19 mmGuided Roman Ogee 25 mm 12 mmGuided Roman Ogee 36 mm 16 mmGuided Rounding R 6.5mm 25 mm 12 mmGuided Rounding R 10mm 32 mm 16 mmGuided Rounding 12.7mm 36 mm 20 mm
Paslode 75mm x 3.1mm Ring Shank Galvanised Nails Pack of 2500 for IM90i
£63.95
Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on SpecificationMeet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and cove...
