iDecorating
Coving
Trend Double Guided Sunk Bead R5.0mm (Tct Router Cutter Range / Sunk Bead)
£47.12
For creating a concave radius or cove in the edge of furniture and columns.Dimensions:Diameter: 57/64 inchDiameter: 22.7 mmCutting Length: 25/64 inchCutting Length: 10 mmOverall Length: 61 mmCutting Radius: 5 mmSha...
Egg & Dart Dado Rail Pack of 6
£46.99
12m Pack (6 x 2m). Made from polyurethane. Extremely light and robust, with a density comparable to traditional timber but much easier to fit. The flexibility to follow contours of uneven walls and ease of trimming with a knife or fine saw, means a professional look with minimal filling and no splitting. No primer or undercoat is required and a classy finish is easily achieved with water-based emulsion and gloss paints. Ease of installation and superior finish means this product is worth the premium against either traditional wood or plaster products. Fix with No Nonsense Grab Adhesive Solvent-Free (Quote 87451). Features: Cuts Clean & Smooth; No Primer Required; Light & Easy to Handle; Mitres Clean & Crisp; Smooth Cross Section; 'Plaster' Finish.
Trend B/Guided Cove 9.5mm Rad (Tct Router Cutter Range / Radius)
£46.61
The two bearings offer the means of cutting different depths of mouldings.Two bearings are supplied.Dimensions:Diameter: 28.5mmCutting Length: 14mmBearing Diameter: 9.5mm & 12.7mmCutting Radius: 9.5mmShank Diameter: 1/...
Trend B/Guided Cove 9.5mm Rad (Tct Router Cutter Range / Radius)
£46.61
The two bearings offer the means of cutting different depths of mouldings.Two bearings are supplied.Dimensions:Diameter: 28.5mmCutting Length: 14mmBearing Diameter: 9.5mm & 12.7mmCutting Radius: 9.5mmShank Diameter: 1/...
Supercove Lightweight Coving 12 x 2m Pack
£44.99
24m Pack (12 x 2m). Tough, lightweight polyurethane with fine, sharp edges and clean lines. Fully paintable. Features: No Need to Pin; No Primer Required; Easy to Handle & Carry; Indistinguishable from Plaster Finish; Cuts Easily with Craft Knife/Hacksaw Blade.
Trend Guided Panel Cove R9.5mm x 12.7mm (Tct Router Cutter Range / Panel Cove)
£44.47
A shank mounted bearing guided cove router cutter. Suitable for creating grooves and other decorative effects.Can be used to rout draining board grooves.Dimensions:Diameter: 19.1mmCutting Length: 11mmOverall Length: 55mmBe...
Trend Double Guided Sunk Bead R3.2mm (Tct Router Cutter Range / Sunk Bead)
£44.47
For creating a concave radius or cove in the edge of furniture and columns.Dimensions:Diameter: 3/4 inchDiameter: 19.1 mmCutting Length: 1/4 inchCutting Length: 6.35 mmOverall Length: 61.0 mmCutting Radius: 3.2 mmS...
Trend B/Guided Flat Sunk Bead R12mm (Tct Router Cutter Range / Guided Sunk Bead)
£43.96
For creating a concave radius or cove in the edge of furniture and columns.Dimensions:Diameter: 22.2mmCutting Length: 19.1mmBearing Diameter: 12.7 mmCutting Radius: 12mmShank Diameter: 1/2 inchPlease note that pric...
Trend Cove 9mm Rad x 18mm Dia (Tct Router Cutter Range / Radius)
£43.45
For coves and part of a rule joint. Two flute.Dimensions:Diameter: 18mmCutting Length: 19mmCutting Radius: 9mmShank Diameter: 8mmPlease note that prices in the Trend Catalogue download, if shown below, may differ t...
Trend Cove 9mm Rad x 18mm Dia 257093 (Tct Router Cutter Range / Radius)
£43.45
For coves and part of a rule joint. Two flute.Dimensions:Diameter: 18mmCutting Length: 19mmCutting Radius: 9mmShank Diameter: 1/4 inchPlease note that prices in the Trend Catalogue download, if shown below, may dif...
Trend Radius 9mm Rad x 19mm Cut (Tct Router Cutter Range / Radius)
£43.45
For coves and part of a rule joint. Two flute.Dimensions:Diameter: 18mmCutting Length: 19mmCutting Radius: 9mmShank Diameter: 1/2 inchPlease note that prices in the Trend Catalogue download, if shown below, may dif...
Trend Guided cove cutter 12.7mm diameter
£43.35
The two bearings supplied offer the means of cutting different depths of mouldings.
Trend Guided cove cutter 12.7mm diameter
£42.63
The two bearings supplied offer the means of cutting different depths of mouldings.
Magic Mitre Box
£42.38
For cutting mitres to architraves, skirting, dado rails and crown mouldings including 135 mm girth cornice or coving. A template is used to transfer internal or external angles to a sliding jig. Connecting the template to the mitre sets the angle ...
