iDecorating
Coving
Trend Radius 9.5mm radius x 19.1mm diameter
£32.41
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig.
Trend Radius 9.5mm radius x 19.1mm diameter
£32.41
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig.
Trend 12 Piece Starter Cutter Set (Router Cutter Sets / Starter Sets)
£32.38
Protected in a plastic carrying case, this twelve piece set contains a range of the most widely used cutters for both decorative as well as constructional woodworking.The set contains two straight cutters, a radius cove, a V groove and a dovetail...
Trend Radius 7.9mm radius x 15.9mm diameter
£30.00
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig.
Covemaster Coving Room Kit White
£29.98
Room kit contains 18 linear metres coving including pre-mitred corners, Paper-wrapped for a professional finish, No pinning required, Fix with adhesive only
Trend Radius 5mm Rad & 18mm Cut (Tct Router Cutter Range / Radius)
£29.48
For coves and part of a rule joint. Single flute.Dimensions:Diameter: 10mmCutting Length: 18mmCutting Radius: 5mmShank Diameter: 3/8 inchPlease note that prices in the Trend Catalogue download, if shown below, may ...
Covemaster Coving Room Kit White
£28.98
Room kit contains 18 linear metres coving including pre-mitred corners, Paper-wrapped for a professional finish, No pinning required, Fix with adhesive only
Trend Radius 5mm Rad & 18mm Cut 253350 (Tct Router Cutter Range / Radius)
£28.97
For coves and part of a rule joint. Single flute.Dimensions:Diameter: 10mmCutting Length: 18mmCutting Radius: 5mmShank Diameter: 1/4 inchPlease note that prices in the Trend Catalogue download, if shown below, may ...
Trend Radius 5mm Rad & 18mm Cut (Tct Router Cutter Range / Radius)
£28.97
For coves and part of a rule joint. Single flute.Dimensions:Diameter: 10mmCutting Length: 18mmCutting Radius: 5mmShank Diameter: 8mmPlease note that prices in the Trend Catalogue download, if shown below, may diffe...
Trend Two Flute Guided Cove 1.6mm Rad (Tct Router Cutter Range / Radius)
£28.97
The two bearings offer the means of cutting different depths of mouldings.Two bearings are supplied.Dimensions:Diameter=1/2 inchDiameter=12.7 mmCutting Length: 1/2 inchCutting Length: 12.7 mmBearing Diameter: 9.5 & 12....
Supercove Lightweight Coving 6 x 2.4m Pack
£27.99
14.4m Pack (6 x 2.4m). Tough, lightweight polyurethane with fine, sharp edges and clean lines. Fully paintable. Features: No Need to Pin; No Primer Required; Easy to Handle & Carry; Indistinguishable from Plaster Finish; Cuts Easily with Craft Knife/Hacksaw Blade.
Paslode 63mm x 3.1mm Ring Shank Galvanised Nails Pack of 1100 for IM350
£27.95
Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on SpecificationMeet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and cove...
Trend Radius Cutter 4.0mm Rad x 12.7mm C (Tct Router Cutter Range / Radius)
£27.34
For coves and part of a rule joint. Two flute.Dimensions:Diameter: 8mmCutting Length: 12.7mmCutting Radius: 4mmShank Diameter: 1/4 inchPlease note that prices in the Trend Catalogue download, if shown below, may di...
Lightweight Polystyrene Coving
£27.05
Well defined edge featuresCovers up cracksLightweight and easy to install
Artex Simply Classic Paper Faced Cove (L)200cm x (D)13.5cm 5 pack
£26.98
Available in 2m lengths for easy handling and fitting
Coving Room Kit
£26.54
Lightweight, easy and quick to installContains pre-cut lengths and cornersSufficient for most room shapes
