iDecorating
Products tagged with: dies
Pages:
1
Draper 37 Piece Tap And Die Set
£68.60
Manufactured from carbon steel. Taps and dies suitable for cleaning and cutting threads on mild steel and aluminium. Supplied complete with the correct drill bits for tapping. Contents held in plastic insert within steel storage case.Conten...
Draper 52 Piece Tap And Die Set
£106.66
Manufactured from carbon steel. Taps and dies suitable for cleaning and cutting threads on mild steel and aluminium. Supplied complete with the correct drill bits for tapping. Contents held in plastic insert within steel storage case.Conten...
Draper 75 Piece Combination Tap And Die Set Metric & Bsp
£89.95
Manufactured from carbon steel. Taps and dies suitable for cleaning and cutting threads on mild steel and aluminium. Supplied with the correct drill bits for tapping. Contents held in plastic insert within steel storage case.Contents:&#...
Plug Tap M10 HSS Pitch 1.5mm
£8.20
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
Plug Tap M12 HSS Pitch 1.75mm
£11.21
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
Plug Tap M14 HSS Pitch 2mm
£14.72
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
Plug Tap M16 HSS Pitch 2mm
£16.84
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
Plug Tap M18 HSS Pitch 2.5mm
£24.50
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
Plug Tap M2 HSS Pitch 0.4mm
£9.77
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
Plug Tap M2.5 HSS Pitch 0.45mm
£8.45
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
Plug Tap M20 HSS Pitch 2.5mm
£26.71
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
Plug Tap M3 HSS Pitch 0.5mm
£6.19
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
Plug Tap M3.5 HSS Pitch 0.6mm
£6.76
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
Plug Tap M4 HSS Pitch 0.7mm
£5.45
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
Plug Tap M5 HSS Pitch 0.8mm
£6.10
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
Plug Tap M6 HSS Pitch 1mm
£6.00
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
Plug Tap M8 HSS Pitch 1.25mm
£6.95
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
Trojan M24 Plug Tap HSS
£51.96
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
Pages:
1
