iDecorating
Products tagged with: traditional
Acova 2 Column Horizontal Radiator White (H) 600 x (W) 1042mm
£199.00
Point to point measurement: 1042mm, 2 Column radiator 22 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 85mm min, 90mm max. Wall to centre of connections: 54 or 59mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 2 Column Horizontal Radiator White (H) 600 x (W) 1226mm
£259.00
Point to point measurement: 1226mm, 2 Column radiator 26 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 85mm min, 90mm max. Wall to centre of connections: 54 or 59mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 2 Column Horizontal Radiator White (H) 600 x (W) 1410mm
£289.00
Point to point measurement: 1410mm, 2 Column radiator 30 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 85mm min, 90mm max. Wall to centre of connections: 54 or 59mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 2 Column Horizontal Radiator White (H) 600 x (W) 628mm
£139.00
Point to point measurement: 628mm, 2 column radiator, 13 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 85mm min, 90mm max. Wall to centre of connections: 54mm or 59mm, Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 2 Column Horizontal Radiator White (H) 600 x (W) 812mm
£169.00
Point to point measurement: 812mm, 2 Column radiator 17 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 85mm min, 90mm max. Wall to centre of connections: 54 or 59mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 2 Column Vertical Radiator White (H) 2000 x (W) 306mm
£179.00
Point to point measurement: 306mm, 2 Column radiator 6 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 85mm min, 90mm max. Wall to centre of connections: 54 or 59mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 2 Column Vertical Radiator White (H) 2000 x (W) 398mm
£189.00
Point to point measurement: 398mm, 2 Column radiator 8 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 85mm min, 90mm max. Wall to centre of connections: 54 or 59mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 2 Column Vertical Radiator White (H) 2000 x (W) 490mm
£219.00
Point to point measurement: 490mm, 2 Column radiator 10 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 85mm min, 90mm max. Wall to centre of connections: 54 or 59mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 3 Column Horizontal Radiator White (H) 600 x (W) 1042mm
£219.00
Point to point measurement: 1042mm, 3 Column radiator 22 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 123mm min, 128mm max. Wall to centre of connections: 73 or 78mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 3 Column Horizontal Radiator White (H) 600 x (W) 1226mm
£289.00
Point to point measurement: 1226mm, 3 Column radiator 26 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 123mm min, 128mm max. Wall to centre of connections: 73 or 78mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 3 Column Horizontal Radiator White (H) 600 x (W) 628mm
£149.00
Point to point measurement: 628mm, 3 Column radiator 13 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 123mm min, 128mm max. Wall to centre of connections: 73 or 78mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 3 Column Horizontal Radiator White (H) 600 x (W) 812mm
£179.00
Point to point measurement: 812mm, 3 Column radiator 17 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 123mm min, 128mm max. Wall to centre of connections: 73 or 78mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 4 Column Horizontal Radiator White (H) 300 x (W) 1042mm
£199.00
Point to point measurement: 1042mm, 4 Column radiator 22 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 159mm min, 164mm max. Wall to centre of connections: 91 or 96mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 4 Column Horizontal Radiator White (H) 300 x (W) 628mm
£129.00
Point to point measurement: 628mm, 4 Column radiator 13 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 159mm min, 164mm max. Wall to centre of connections: 91 or 96mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 4 Column Horizontal Radiator White (H) 300 x (W) 812mm
£159.00
Point to point measurement: 812mm, 4 Column radiator 17 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 159mm min, 164mm max. Wall to centre of connections: 91 or 96mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 4 Column Horizontal Radiator White (H) 600 x (W) 1042mm
£245.00
Point to point measurement: 1042mm, 4 Column radiator 22 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 159mm min, 164mm max. Wall to centre of connections: 91 or 96mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 4 Column Horizontal Radiator White (H) 600 x (W) 628mm
£159.00
Point to point measurement: 628mm, 4 Column radiator 13 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 159mm min, 164mm max. Wall to centre of connections: 91 or 96mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
Acova 4 Column Horizontal Radiator White (H) 600 x (W) 812mm
£199.00
Point to point measurement: 812mm, 4 Column radiator 17 sections wide, Brackets and 1/2 inch air vent included. Screw fixings are not included., For further information on the support foot, refer to "Acova Optional Support Feet", Total projection from wall: 159mm min, 164mm max. Wall to centre of connections: 91 or 96mm., Connection position: BOE - Bottom Opposite Ends. For correct circulation,the water MUST enter the radiator diagonally opposite the air vent., Pipe centres are dependent on valves used, Valves are not included, It is advised that, if pre-piping is necessary, allowances are made to accommodate manufacturing tolerances., Manufacturing tolerance of +/- 0.6mm per section, All outputs are stated to 50dt in line with European EN442 testing standards, A low water content radiator, giving fast, efficient heating, On installation of a new radiator, the entire central heating system should be flushed., 5 years, terms and conditions apply, It should also be chemically cleaned and an inhibitor used that is suitable for a mixed metal system.
